Magnesium Alloy Plate

1. magnesium alloy material 2. Spec: az31 3. process: hot-rolled 4. thickness: 0.3-200mm, width: 200-2800mm

Introduction of magnesium alloy plate/magnesium alloy sheet:

AZ31 magnesium alloy plate is a wrought magnesium base alloy with good room-temperature strength and ductility combined with corrosion resistance and weldability. Increased strength is obtained by strain hardening with a subsequent partial anneal (H24 and H26 tempers).

Our sheet and plate's size range is:

Sheet: thickness from 1mm to 6mm; Max. width is 600mm; Max. length is 6000mm;

Plate: thickness from 6 mm to 200mm; Max. width is 2000mm; Max. length is 6000mm;

Block: We can supply cut-to-size blocks according to customer's requirements.

Coil: thickness from 0.35 to 2.7mm, max. width 240mm;

APPLICATIONS

magnesium alloy plate in AZ31 find application in medium strength service at temperatures below 150°C. Diverse uses including aerospace, aircraft, concrete tools, 3C (cell phone / camera / computer), speaker cones and textile machinery can all benefit from light weight AZ31B.

AZ31 magnesium alloy plate is non-magnetic and has high electrical and thermal conductivity filling the requirements for RFI and EMI shielding in the electronics and computer industries.

Superplastic forming of AZ31B sheet at elevated temperatures allows production of a wide variety of intricate parts for automotive uses. Monocoque construction utilizing formed sheet can be adapted to many commercial applications.

SPECIFICATIONS

ASTM B90/B90M-07

AMS 4375

AMS 4376

AMS 4377

CHEMICAL COMPOSITION

Al: 2.5-3.5%

Zn: 0.7-1.3%

Mn: 0.20 – 1.0%

Mg: Balance

PHYSICAL PROPERTIES

Density: 1.78

Coefficient of thermal expansion: 26.8 x 10-6K-1

Specific heat: 1040 Jkg-1k-1

Thermal conductivity: 76.9Wm-1k-1

Electrical resistivity: 92nΩm

Modulus of elasticity: 45 x 109Pa

Poissons ratio: 0.35

Melting range: 566 - 632°C

HEAT TREATMENT

No thermal treatment is available for increasing the strength of this alloy after fabrication.

MECHANICAL PROPERTIES

Alloy and Temper	Thickness (mm)	Yield Strength 0.2% offset (MPa)	Tensile strength (MPa)	Elongation In 5.65 √A (%)
AZ31B-O	0.35 – 1.5	125	221	10
	1.5 – 6.3	105	221	9
	6.3 - 75	105	221	8
AZ31B-H24	0.5 – 6.3	200	269	5
	6.3 -9.5	179	262	7
	9.5 – 12.7	165	255	8
	12.7 - 25	152	248	8
	25- 50	138	234	6
	50 - 80	124	234	7
AZ31B-H26	6.3 - 10	186	269	6
	10 – 12.5	179	262	6
	12.5 - 20	172	255	5
	20 – 25	159	255	5
	25 - 40	152	241	5
	40 - 50	148	241	5

The sheet and plate shall conform to the tensile requirements in above Table unless other agreement is made between seller and purchaser. Mechanical Properties for sizes and tempers not shown in above Table shall be as agreed upon by seller and purchaser.

OTHER PROPERTIES

Typical Hadness

O temper: 67 Rockwell E

H24 temper: 83 Rockwell E

WELDABILITY

Excellent weldability with gas shielded arc using AZ61A (preferred) or AZ92A filler rod; post weld stress relief is required to prevent stress corrosion cracking. Resistance welding is excellent.

MACHINING

AZ31B, like all magnesium alloy plate and sheet, machines faster than any other metal. Providing the geometry of the part allows, the limiting factor is the power and speed of the machine rather than the quality of the tool material. The power required per cubic centimeter of metal removed varies from 9 to 14 watts per minute depending on machining operation.

DENT RESISTANCE

Weight for weight, AZ31B-H24 has proven to be superior to competitive materials in its resistance to denting at moderate energy levels.

Dent Resistance of 1mm Gauge Sheet (Dent depth in mm from 25mm spherical redius indentor on 350mm span)

	Impact Energy 0.34 J	Impact Energy 0.62 J	Impact Energy 1.25 J
AZ21B-H24 6061 – T6 3003 – H14 5052 – H34 2024 – T6 SAE 1010 Mild Steel	0.66 0.94 2.24 1.55 0.99 1.09	1.42 1.52 3.23 2.41 1.52 1.70	2.34 2.46 4.90 3.35 2.29 2.67

SURFACE TREATMENT

All the normal chromating, anodizing, plating, and finishing treatment are readily applicable. AZ31B also responds well to plasma electrolytic oxidation finishing.

Magnesium Alloy Plate