mg alloy sheet/mg alloy plate

Magnesium Alloys AZ31B Standard: ASTM B107 (Extruded Shapes) ASTM B90 (mg alloy sheet) ASTM B91 (Forging - Open Die)

Chemistry Data :

Aluminum	2.5 - 3.5
Copper	0.05 max
Iron	0.005 max
Magnesium	Balance
Manganese	0.2 min
Nickel	0.005 max
Silicon	0.1 max
Zinc	0.6 - 1.4

Principal Design Features:

Certainly the most widely available of the magnesium grades, AZ31B is produced in a wide variety of shapes from sheet and plate through bar forms. It is commonly used as an alternative to aluminum alloys due to its high strength to weight ratio. Care must be taken in machining the grade, however, because the chips and powder can be flammable.

Applications

Used in a variety of aerospace applications and general commercial applications requiring good properties and high strength to weight ratio.

Machinability

Very high machinability rating. As with any magnesium alloy, great care should be taken because this material is flammable. To avoid this potential hazard, positive cuts should be taken, as large chips are less likely to ignite. Flooding with lubricant is also required and good procedure should include constant monitoring of the operation by a machinist equipped with a magnesium fire arresting kit, such as black powder.

Forming:

Best results are obtained by preheating the material to 500 F. Bend radii of twice the material thickness is possible with proper procedures.

Welding:

Best welded by the inert gas tungsten arc and metal arc methods.

mg alloy sheet/mg alloy plate